Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 598 / 1058

55. Multicast Listener Discovery (MLD) Commands
599
55.3. show mld group
 Description
This command is used to display the MLD group member table.

Format
show mld group {ipif <ipif_name 12> | group <ipv6addr>}

Parameters

Restrictions
None.

Example
To display all the MLD group member information on the Switching Hub, the "Expiry" uses
second as the unit:
To display all the MLD group member information of interface "n10", the "Expiry" uses
second as the unit:
ipif (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
group (Optional) Specifies the IPv6 multicast group address used.
<ipv6addr>
Enter the IPv6 multicast group address used here.
Zxxx0:admin# show mld group
Command: show mld group
Interface Multicast Group Expiry
------------ ----------------- -----
System FF1E::100:0:0:20 260
n10 FF1E::1001:1234 255
n20 FF1E::2AC4:0:452 260
n10 FF1E::5A3D:11:23C1 260
Total Entries : 4
Zxxx0:admin#