Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 1002 / 1058

89. Web-based Access Control (WAC) Commands
1003
89.3. config wac authorization attributes
 Description
This command is used to configure the acceptance of an authorized configuration.
When the authorization is enabled for WAC's RADIUS, the authorized data assigned
by the RADUIS server will be accepted if the global authorization network is enabled.
When the authorization is enabled for WAC's local, the authorized data assigned by
the local database will be accepted.

Format
config wac authorization attributes {radius [enable | disable] | local [enable |
disable]}(1)
 Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the acceptance of an authorized configuration:
radius If specified to enable, the authorized data assigned by the RADUIS server will be accepted
if the global authorization network is enabled. The default state is enabled.
enable
Specify to enable authorized data assigned by the RADIUS server to be
accepted.
disable Specify to disable authorized data assigned by the RADIUS server from being
accepted.
local If specified to enable, the authorized data assigned by the local database will be accepted
if the global authorization network is enabled. The default state is enabled.
enable
Specify to enable authorized data assigned by the local database to be
accepted.
disable Specify to disable authorized data assigned by the local database from being
accepted.
Zxxx0:admin#config wac authorization attributes local disable
Command: config wac authorization attributes local disable
Success.
Zxxx0:admin#