Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 718 / 1058

62. Protocol Independent Multicast (PIM) Commands
719

Restrictions
None.

Example
To list all the RPset information:
62.18. create pim
register_checksum_include_data
rp_address

Description
This command is used to decide the checksum in register packet will include the data
portion or not. As defined in RFC 4601, the checksum for Registers is done only on the first
8 bytes of the packet, including the PIM header and the next 4 bytes, excluding the data
packet portion. Some earlier PIM-SM routers will calculate checksum for register packet
including data portion. This configuration makes our routers communicate with those
earlier routers smoothly. The default set is not including data portion.

Format
create pim register_checksum_include_data rp_address <ipaddr>

Parameters
Zxxx0:admin# show pim rpset
Command: show pim rpset
PIM RP-Set Table
Bootstrap Router: 10.54.71.9
RP-Set Group RP-Set Adress Holdtime Expired Time Type
--------------- --------------- --------- ------------- -------
224.0.0.0/4 10.20.6.36 210 196
224.0.0.0/4 10.54.71.9 0 0 static
Total Entries: 2
Zxxx0:admin#
rp_address
Specifies that the RP will expect to receive a register packet in which the checksum will be
included in the data portion .
<ipaddr>
Enter the IP address used here.