Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 706 / 1058

62. Protocol Independent Multicast (PIM) Commands
707
62.5. show pim

Description
This command is used to display the current PIM configuration.

Format
show pim {ipif <ipif_name 12>}
 Parameters

Restrictions
None.

Example
To display PIM configurations of IP interface System:
Zxxx0:admin# show pim neighbor
Command: show pim neighbor
PIM Neighbor Address Table
Interface Name Neighbor Address Expire Time
--------------- ---------------- -----------
System 10.48.74.122 5
Total Entries : 1
Zxxx0:admin#
ipif (Optional) Specifies the name of the IP interface used to display the PIM configuration.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
If no parameter is specified, the system will display all the PIM configurations of all IP interfaces.