Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 73 / 1058

6. 802.1X Commands
74

Parameters
None.

Restrictions
None.
 Example
To display guest VLAN information:
6.20. config radius add
 Description
This command is used to add a new RADIUS server. The server with a lower index has
higher authenticative priority.
 Format
config radius add <server_index 1-3> [<server_ip> | <ipv6addr>] key <password 32>
[default | {auth_port <udp_port_number 1-65535> | acct_port <udp_port_number 1-
65535> | timeout <sec 1-255> | retransmit <int 1-20>}(1)]

Parameters
Zxxx0:admin#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest Vlan Setting
-----------------------------------------------------------
Guest vlan : guest
Enable guest vlan ports : 1-10
Zxxx0:admin#
<server_index 1-3>
Specify the RADIUS server index.
<server_ip>
Specify the IP address of the RADIUS server.
<ipv6add>
Specifies the IPv6 address used.
key Specify the key pre-negotiated between Switching Hub and the RADIUS server. It is used
to encrypt user
'
s authentication data before being transmitted over the Internet. The
maximum length of the key is 32.
<passwd 32>
The maximum length of the password is 32 characters long.
default Sets the auth_port to be 1812 and acct_port to be 1813.