Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 497 / 1058

46. LLDP Commands
498
46.1. enable lldp

Description
This command is used to enable LLDP. This is a global control for the LLDP function.
When this function is enabled, the Switching Hub can start to transmit LLDP packets
and receive and process the LLDP packets. The specific function of each port will
depend on the per port LLDP setting. For the advertisement of LLDP packets, the
Switching Hub announces the information to its neighbor through ports. For the
receiving of LLDP packets, the Switching Hub will learn the information from the
LLDP packets advertised from the neighbor in the neighbor table.The default state
for LLDP is disabled.

Format
enable lldp

Parameters
None.

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable LLDP:
config lldp_med ports [<portlist> | all] med_transmit_capabilities [all | {capabilities |
network_policy | inventory}(1)] state [enable | disable]
show lldp_med ports {<portlist>}
show lldp_med
show lldp_med local_ports {<portlist>}
show lldp_med remote_ports {<portlist>}
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
show lldp mgt_addr {[ipv4 <ipaddr> | ipv6 <ipv6addr>]}
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
show lldp statistics
show lldp statistics ports {<portlist>}
Zxxx0:admin#enable lldp
Command: enable lldp
Success.
Zxxx0:admin#