Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 300 / 1058

23. DHCP Server Commands
301
23.17. create dhcp pool manual_binding
 Description
This command is used to specify the distinct identification of the client in dotted-
hexadecimal notation or hardware address.
An address binding is a mapping between the IP address and MAC address of a client. The
IP address of a client can be assigned manually by an administrator or assigned
automatically from a pool by a DHCP server.
The IP address specified in the manual binding entry must be in a range within that the
network uses for the DHCP pool. If the user specifies a conflict IP address, an error
message will be returned. If a number of manual binding entries are created, and the
network address for the pool is changed such that conflicts are generated, those manual
binding entries which conflict with the new network address will be automatically deleted.

Format
create dhcp pool manual_binding <pool_name 12> <ipaddr> hardware_address <macaddr>
{type [ethernet | ieee802]}
 Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure manual bindings:
<pool_name 12>
Specify the DHCP pool name.
<ipaddr>Specify the IP address which will be assigned to a specified client.
hardware_address
Specify the hardware MAC address.
<macaddr>
Enter the MAC address here.
type (Optional) Specify the DHCP pool manual binding type.
ethernet
Specify Ethernet type.
ieee802
Specify IEEE802 type.