Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 227 / 1058

20. Debug Software Command List
228
20.9. debug stp show counter
 Description
This command used to display the STP counters.

Format
debug stp show counter {ports [<portlist> | all]}

Parameters

Restrictions
Only Administrator-level users can issue this command.
 Example
To show the STP counters for port 9:
ports (Optional) Specifies the STP ports for display.
<portlist>
Enter the list of port used for this configuration here.
all Display all port's counters.
If no parameter is specified, display the global counters.
Zxxx0:admin# debug stp show counter ports 9
Command: debug stp show counter ports 9
STP Counters
--------------------------------------
Port 9 :
Receive:
Transmit:
Total STP Packets :32 Total STP Packets :32
Configuration BPDU :0 Configuration BPDU :0
TCN BPDU :0 TCN BPDU :0
RSTP TC-Flag :15 RSTP TC-Flag :7
RST BPDU :32 RST BPDU :32
Discard:
Total Discarded BPDU
:0
Global STP Disabled :0
Port STP Disabled :0
Invalid Packet Format :0
Invalid Protocol :0
Configuration BPDU Length :0
TCN BPDU Length
:0
RST BPDU Length :0
Invalid Type :0
Invalid Timers :0
Zxxx0:admin#