Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 10 / 1058

1. Product Outline
11
1. Product Outline
ZEQUO 6400 is a Layer-3 All Gigabit Ethernet Switching Hub with man
-
agement functions, equipped with 24 10/100/1000BASE-T ports, four
1000BASE-X SFP extension slots, and four 1000BASE-X/10GBASE-X
extension slots.
1.1. Features

Ports 1 to 24 (copper ports) are 10BASE-T/100BASE-TX/1000BASE-T ports correspond
-
ing to auto negotiation.

Ports 21 to 24 are SFP extension ports. You can select either of 1000BASE-T supported
copper port or SFP port for use.

Ports 25 to 28 are SFP/SFP+ extension ports. Capable of 10 Gbps communications
with SFP+ module.

Ports 27 to 28 can also be used as stack ports.
Up to four units of ZEQUO 6400 or ZEQUO6500 can be connected in a stack with
SFP+ modules and optical fiber cables, or SFP+ direct attach cables.
 A SD card can be used to change and save configuration and firmware.

All copper ports support the straight/cross cable via auto sensing function.
You can simply connect devices with straight cables, whether the target is a terminal or
a network device.
 The Power Saving Mode detects the connection status automatically and saves power
consumption to minimum.
 The auto negotiation function is supported, allowing to easily support a heteroge -
neous environment of 10BASE-T, 100BASE-TX, and 1000BASE-T. The speed and com
-
munication mode can be set at Fixed.
 The Ping command can be used to verify communications.

The standard MIB (MIB II, Bridge MIB, RMON four groups, etc.) is supported, allowing
to manage the Switching Hub from the SNMP manager. (For details, refer to Appendix
A.)
 The support application “ZEQUO assist Plus” supports GUI-based easy configura -
tion for installation.
 RIP is supported, allowing to dynamically build a network.

OSPF is supported, allowing for efficient routing even in a large-size network.

PIM-SM/PIM-DM/PIM-SM-DM/PIM-SSM are supported, allowing for efficient multicast
routing.