Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 727 / 1058

63. PIM for IPv6 Command List
728
63.3. config pim6 cbsr

Description
This command is used to set the C-BSR state, the priority and the hash mask length of the
candidate bootstrap router on an interface.

Format
config pim6 cbsr {ipif <ipif_name 12> state [enable | disable] | priority <value 0-255> |
hash_masklen <value 0-128>}(1)

Parameters
Zxxx0:admin#show pim6 ipif System
Command: show pim6 ipif System
Interface name : System
Interface Link-Local Address : -
Interface Global Address : -
PIM6 Mode : SM
State : Enabled
Designated Router : -
Designated Router Priority : 1
Designated Router Priority Enabled : True
Hello Interval : 60 sec
Triggered Hello Interval : 5 sec
Hello Holdtime : 210 sec
Join Prune Interval : 60 sec
Join Prune Holdtime : 210 sec
LAN Delay Enabled : True
Propagation Delay : 1 sec
Override Interval : 3 sec
Effective Propagation Delay : 1 sec
Effective Override Interval : 3 sec
Join Suppression Enabled : False
Bidirectional Capable : False
BSR Domain Border : Disabled
Stub interface : Disabled
Zxxx0:admin#
ipif Specify the IP interface.
<ipif_name 12>
Enter the IP interface name. This name can be up to 12 characters long.
state Specify to determine whether the input interface can be a C-BSR.
enable
Specify that the interface is a C-BSR.
disable
Specify that the interface is not a C-BSR. This is the default.