Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 724 / 1058

63. PIM for IPv6 Command List
725

Parameters
ipif Specify to apply the configurations to this specific IP interface.
<ipif_name 12>
Enter the IP interface name.
all Specify to apply the configurations to all IP interfaces.
hello_interval
Specify the interval of issuing hello packets fo find neighboring routers.
<sec 0-18000>
Enter the time between 0 and 18000 seconds. The default value is 30.
triggered_hello_delay
Specify the maximum time, in seconds, before the router sends a triggered PIM Hello
message on the specified interface. A value of zero indicates that triggered PIM6 Hello
message should always be sent immediately.
<sec 0-60>
Enter the time between 0 and 60 seconds. The default value is 5.
propagation_delay
Specify the expected propagation delay between the PIM6 routers on this network or
link, in seconds.
<sec 0-32>
Enter the time between 0 and 32 seconds. The default value is 1.
override_interval
Specify the value for the router to insert into the Override_Interval field of the LAN Prune
Delay option in the PIM6 Hello messages it sends on this interface. When overriding a
prune, PIM6 routers pick random time duration up to the value of this object. The more
PIM6 routers that are active on a network, the more likely it is that the prune will be
overridden after a small proportion of this time has elapsed. The more PIM6 routers are
active on this network, the larger this object should be to obtain an optimal spread of
prune override latencies.
<sec 0-65>
Enter the time between 0 and 65 seconds. The default value is 3.
jp_interval
Specify the frequency at which this router sends PIM6 Join/Prune messages on this PIM6
interface. A value of zero represents not to send PIM Join/Prune message on this
interface.
<sec 0-18000>
Enter the time between 0 and 18000 seconds. The default value is 60.
dr_priority
Specify the Designated Router Priority value inserted into the DR Priority option in PIM6
Hello message transmitted on this interface. Numerically higher values for this parameter
indicate higher priorities.
<uint 0-4294967294>
Enter the value between 0 and 4294967294. The default value is 1.
bsr_border
Specify to determine whether this interface is a PIM6 domain border. If this interface is a
domain border, it prevents bootstrap router (BSR) messages from being sent or received
through it.
disable
Specify that the interface is not a PIM6 domain border. This is the default.
enable
Specify that the interface is a PIM6 domain border.