Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 733 / 1058

63. PIM for IPv6 Command List
734
63.10. config pim6 last_hop_spt_switchover
 Description
This command is used to make the last hop router to decide whether to receive the
multicast data from the shared tree or switch over to the shortest path tree (SPT).
 Format
config pim6 last_hop_spt_switchover [never | immediately]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To set the SPT-switchover mode to never:
63.11. show pim6 neighbor

Description
This command is used to display all neighbors learned by PIM6 on the Switching Hub.

Format
show pim6 neighbor {ipif <ipif_name 12>}
never Specify to never switch to SPT. The last hop router always receives the multicast data
from the shared tree. This is the default.
immediately
Specify to immediately switch to SPT. The last hop router switches from shared tree to
shortest path tree on the first multicast data arrived.
Zxxx0:admin#config pim6 last_hop_spt_switchover never
Command: config pim6 last_hop_spt_switchover never
Success.
Zxxx0:admin#