Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 333 / 1058

26. DHCPv6 Server Commands
334
26.15. config dhcpv6 pool excluded_address
 Description
This command is used to configure the reserved IPv6 addresses on the DHCPv6 server.

Format
config dhcpv6 pool excluded_address <pool_name 12> [add begin <ipv6addr> end
<ipv6addr> | delete [begin <ipv6addr> end <ipv6addr> | all]]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To add the IPv6 addresses range that DHCPv6 server should not assign to clients:
<pool_name 12>
Enter the DHCPv6 pool name used here. This name can be up to 12 characters long.
add Specifies to add an excluded address range for a specified pool.
begin Specifies the beginning IPv6 address of the range of IPv6 addresses to be excluded
from the DHCPv6 pool.
<ipv6addr>
Enter the beginning IPv6 address used here.
end Specifies the ending IPv6 address of the range of IPv6 addresses to be excluded
from the DHCPv6 pool.
<ipv6addr>
Enter the ending IPv6 address used here.
delete Specifies to delete one or all excluded address ranges of a specified pool.
begin Specifies the beginning IPv6 address of the range of IPv6 addresses to be excluded
from the DHCPv6 pool.
<ipv6addr>
Enter the beginning IPv6 address used here.
end Specifies the ending IPv6 address of the range of IPv6 addresses to be excluded
from the DHCPv6 pool.
<ipv6addr>
Enter the ending IPv6 address used here.
all Specifies to delete all excluded address ranges of a specified pool.
Zxxx0:admin# config dhcpv6 pool excluded_address pool1 add begin 2000::3 end
2000::8
Command: config dhcpv6 pool excluded_address pool1 add begin 2000::3 end 2000::8
Success.
Zxxx0:admin#