Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 302 / 1058

23. DHCP Server Commands
303
23.19. clear dhcp binding
 Description
This command is used to clear a binding entry or all binding entries in a pool or clears all
binding entries in all pools. Note that this command will not clear the dynamic binding
entry which matches a manual binding entry.

Format
clear dhcp binding [<pool_name 12> [<ipaddr> | all] | all]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To clear dynamic binding entries in the pool named "engineering":
23.20. show dhcp binding

Description
This command is used to display dynamic binding entries.

Format
show dhcp binding {<pool_name 12>}
<pool_name 12>
Specify the DHCP pool name to clear.
<ipaddr>
Specify the IP address to clear.
all Specify to clear all IP addresses for the specified pool.
all Specify to clear all binding entries in all pools
Zxxx0:admin#clear dhcp binding engineering 10.20.3.4
Command: clear dhcp binding engineering 10.20.3.4
Success.
Zxxx0:admin#