Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 381 / 1058

32. Filter Commands
382
32.Filter Commands
The commands are used to filter packets from the DHCP server and
NetBIOS over TCP/IP and NetBIOS packets.
The DHCP server packet filtering allows you to limit the number of
DHCP servers to be used if there are multiple DHCP servers on the
network. It also can detect unauthorized DHCP servers and log them or
report them to the management server as a SNMP trap.
Figure 32-1 DHCP server packet filtering
config filter dhcp_server [add permit server_ip <ipaddr> {client_mac <macaddr>} ports [<portlist>
| all] | delete permit server_ip <ipaddr> {client_mac <macaddr>} ports [<portlist> | all] | ports
[<portlist> | all] state [enable | disable] | illegal_server_log_suppress_duration [1min | 5min |
30min] | trap_log [enable | disable]]
show filter dhcp_server
config filter extensive_netbios [<portlist> | all] state [enable | disable]
show filter extensive_netbios
config filter netbios [<portlist> | all] state [enable | disable]
show filter netbios