Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 201 / 1058

19. Didital Diagnostic Monitoring (DDM) Commands
202
19.2. config ddm ports voltage_threshold
 Description
The command configures the voltage thresholds of the specified ports. The precision of the
effective threshold is dependent on the hardware.
 Format
config ddm ports [<portlist> | all] voltage_threshold { high_alarm < voltage > |
low_alarm < voltage > igh_warning < voltage >
| low_warning < voltage > } (1)

Parameters
ports
<portlist>
Specifies a range of ports to be configured. (The portlist format: UnitID: port
number).
all If
'
all
'
parameter is chosen, all optic ports
'
operating parameters will be configured.
voltage_threshold
Specifies the threshold of optic module
'
s voltage.
high_alarm
<voltage>
Specifies the high threshold for the voltage alarm.
When the operating parameter rises above this value, the action associated with
the alarm is taken. The range of this parameter is from 0 to 6.5535 voltages.
low_alarm
<voltage>
Specifies the low threshold for the voltage alarm.
When the operating parameter falls below this value, the action associated with
the alarm is taken. The range of this parameter is from 0 to 6.5535 voltages.
high_warning
<voltage>
Specifies the high threshold for the voltage warning.
When the operating parameter rises above this value, the action associated with
the warning is taken. The range of this parameter is from 0 to 6.5535 voltages.
low_warning
<voltage>
Specifies the low threshold for the voltage warning.
When the operating parameter falls below this value, the action associated with
the warning is taken. The range of this parameter is from 0 to 6.5535 voltages.