Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 663 / 1058

59. Open Shortest Path First (OSPF) Command List
664
59.18. show ospf virtual_link
 Description
This command is used to display the current OSPF virtual interface configuration.

Format
show ospf virtual_link {<area_id> <neighbor_id>}

Parameters
 Restrictions
None.

Example
To display the current OSPF virtual interface configuration:
<area_id>(Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
<neighbor_id>
(Optional) The OSPF router ID for the remote area. This is a 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area's Area Border
Router. This is the router ID of the neighbor router.
If no parameter is specified, the system will display the all current OSPF virtual interface
configuration.
Zxxx0:admin#show ospf virtual_link
Command: show ospf virtual_link
Virtual Interface Configuration
Transit Virtual Hello Dead Authentication Link
Area ID Neighbor Router Interval Interval Status
--------------- --------------- -------- -------- -------------- ------
4.4.4.4 1.1.1.1 10 60 Up
4.4.4.4 6.6.6.6 10 250 Simple Down
Total Entries : 2
Zxxx0:admin#