Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 14 / 1058

1. Product Outline
15
● SFP extension port (Ports 21 to 24)
Install an SFP module. (These ports are exclusive usage with twisted pair ports.)
When SFP extension slot is linked, the port is automatically switched to fiber port mode.
SFP port supports only the full-duplex mode.
● SFP+ extension port (Ports 25 to 28)
Install an SFP or SFP+ module.
When the stacking function is enabled, port 27 and 28 become the stack-specific ports.
● Stacking port (Ports 27 to 28)
Up to four units can be stacked by connecting the SFP+ module and optical fiber
cables, or SFP+ direct attach cables when the stacking function is enabled.
● Console port
Used to connect a VT100 compatible terminal to configure and manage this Switching
Hub.
Transmission mode : RS-232C Emulation mode : VT100
Transmission speed : 9,600 bps Data length : 8 bits
Stop bit : 1 bit Parity control : None
Flow control : None Communication connector : RJ45
Use an RJ45-Dsub 9 pin console cable for connection.