Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 891 / 1058

76. Stacking Commands
892
76.7. config box_priority current_box_id
 Description
This command configures the priority of Switching Hub, which will determines which
box becomes master. Lower number means higher priority. New priority will take
effect after user reboot

Format
config box_priority current_box_id <value 1-4> priority <value 1-63>

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure box priority:
76.8. config my_box_id

Description
This command is used to configure the box ID to the specified value for the local
device. This configuration will take affect after the save command was issued and the
Switching Hub was rebooted.

Format
config my_box_id [auto | <value 1-4>]
<value 1-4>
Enter the current box ID value used here. This value must be between 1 and 4.
priority Specifies the priority assigned to the box, with lower number meaning higher priority.
<value 1-63>
Enter the priority value used here. This value must be between 1 and 63.
Zxxx0:admin# config box_priority current_box_id 1 priority 1
Command: config box_priority current_box_id 1 priority 1
Success.
Zxxx0:admin#