Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 728 / 1058

63. PIM for IPv6 Command List
729
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the C-BSR on the interface "System":
63.4. show pim6 cbsr

Description
This command is used to display the candidate bootstrap router related information.
 Format
show pim6 cbsr

Parameters
None.

Restrictions
None.

Example
To show C-BSR settings on the Switch:
priority (Optional) Specify to set the C-BSR priority.
<value 0-255>
Enter the value between 0 and 255. The default value is 64.
hash_masklen
Specify the length in bits of the mask. This makes use of a hash function for the case
where a group range has multiple RPs with the same priority.
<value 0-128>
Enter the value must be between 0 and 128. The default value is 126 seconds.
Zxxx0:admin#config pim6 cbsr ipif System state enable priority 64 hash_masklen 126
Command: config pim6 cbsr ipif System state enable priority 64 hash_masklen 126
Success.
Zxxx0:admin#