Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 127 / 1058

8. Access Control List (ACL) Egress Command List
128
type Specifies that the rule will apply to the ICMP type traffic value.
<value 0-255>
Enter the ICMP traffic type value here. This value must be between 0
and 255.
code Specifies that the rule will apply to the ICMP code traffic value.
<value 0-255> - Enter the ICMP code traffic value here. This value must be
between 0 and 255.
vlan_based
The rule applies on the specified VLAN.
vlan Specifies the VLAN name.
<vlan_name 32>
Enter the VLAN name used for this configuration here. This name can
be up to 32 characters long.
vlanid
Specifies a VLAN ID.
<vlanid 1-4094>
Enter the VLAN ID used for this congfiguration here. This value must
be between 1 and 4094.
port_group
Specifies the port group value here.
id
Specifies the ID of the port group which the rule applies.
<value 1-64>
Enter the group ID value here. This value must be between 1 and 64.
name Specifies the name of the port group which the rule applies.
<name 16>
Enter the port group name here. This name can be up to 16 characters long.
port Specifies the port in the port group used.
<port>
Enter the port number used here.
permit Specifies that packets matching the egress access rule are permitted by the Switching
Hub.
replace_priority_with
(Optional) Specifies the packets that match the egress access rule are changed the
802.1p priority tag field by the Switching Hub.
<value 0-7>
Enter the replace priority with value here. This value must be between 0 and 7.
replace_dscp_with
(Optional) Specifies the packets that match the egress access rule are changed the DSCP
value by the Switching Hub.
<value 0-63>
Enter the replace DSCP with value here. This value must be between 0 and 63.
counter (Optional) Specifies whether the ACL counter feature is enabled or disabled. This
parameter is optional. The default option is disabled. If the rule is not bound with the
flow_meter, all matching packets are counted. If the rule is bound with the flow_meter,
then the "counter" is overridden.
enable
Specifies that the ACL counter feature will be enabled.
disable
Specifies that the ACL counter feature will be disabled.
deny Specifies the packets that match the egress access rule are filtered by the Switching Hub.