Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 711 / 1058

62. Protocol Independent Multicast (PIM) Commands
712
62.9. create pim crp group
 Description
This command is used to add a multicast group range into a C-RP serve list for PIM-SM.

Format
create pim crp group <network_address> rp <ipif_name 12>

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To add a multicast group range into a C-RP server list:
group Specifies the multicast group address for this Switch to become a Candidate RP. This
address must be a class D address.
<network_address>
Enter the group network address used here.
rp Specifies that the interface will act as C-RP for the group.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
Zxxx0:admin# create pim crp group 224.1.2.3/32 rp System
Command: create pim crp group 224.1.2.3/32 rp System
Success.
Zxxx0:admin#