Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 403 / 1058

34. Internet Group Management Protocol (IGMP) Commands
404
34.8. show igmp static_group
 Description
This command is used to display IGMP static groups on the Switch.

Format
show igmp static_group {ipif <ipif_name 12>}

Parameters
 Restrictions
None.

Example
To display all IGMP static groups on the interface "n20":
To display all IGMP static groups on all interfaces:
ipif (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12>
Enter the IP interface name used for this configuration here. This name can be up
to 12 characters long.
Zxxx0:admin# show igmp static_group ipif n20
Command: show igmp static_group ipif n20
Interface Multicast Group
------------ ---------------
n20 239.0.0.3
Total Entries: 1
Zxxx0:admin#
Zxxx0:admin# show igmp static_group
Command: show igmp static_group
Interface Multicast Group
------------ ---------------
System 225.0.0.1
System 225.0.0.2
n20 239.0.0.3
Total Entries: 3
Zxxx0:admin#