38. IP Routing Commands
440
38.4. create ipv6route
Description
This command is used to create an IPv6 static route in the Switching Hub's IP routing
table. If the next hop is a global address, it is not necessary to indicate the interface
name. If the next hop is a link local address, then the interface name must be
specified.
Format
create ipv6route [default | <ipv6networkaddr>] [[<ipif_name 12> <ipv6addr> |
<ipv6addr>] {<metric 1-65535>} {[primary | backup]} | ip_tunnel <tunnel_name 12>]
Parameters
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an IPv6 default route:
default Specify the default route.
<ipv6networkaddr>
Specify the destination network for the route.
<ipif_name 12> <ipv6addr>
Specify the interface for the route.
<ipv6addr>
Specify the next hop address for this route.
<metric 1-65535>
(Optional) The default setting is 1.
primary (Optional) Specify the route as the primary route to the destination.
backup Specify the route as the backup route to the destination. If the route is not specified as
the primary route or the backup route, then it will be auto-assigned by the system. The
first created is the primary, the second created is the backup.
ip_tunnel
Specifies the IPv6 tunnel name used.
<tunnel_name 12>
Enter the IPv6 tunnel name used here. This name can be up to 12 characters long.
Zxxx0:admin#create ipv6route default System FEC0::5
Command: create ipv6route default System FEC0::5
Success.
Zxxx0:admin#
Summary of Contents for ZEQUO 6400
