Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 232 / 1058

20. Debug Software Command List
233
20.13. debug ospf
 Description
This command is used to enable or disable OSPF debug flags.

Format
debug ospf [neighbor_state_change | interface_state_change {dr_bdr_selection} | lsa {all |
originating | installing | receiving | flooding} (1) | packet {all | receiving | sending} (1) |
retransmission | spf {all | intra | inter | extern} (1) | timer | virtual_link | route |
redistribution] state [enable | disable]

Parameters
neighbor_state_change
The state of the OSPF neighbor state change debug.
interface_state_change
The state of the OSPF interface state change debug.
dr_bdr_selection
(Optional) Used to include or exclude debug information for DR/BDR selection.
lsa The state of the designated debug flag.
all
(Optional) Set all LSA debug flags.
originating
(Optional) Set LSA originating debug flag.
installing
(Optional) Set LSA installing debug flag.
receiving
(Optional) Set LSA receiving debug flag.
flooding
(Optional) Set LSA flooding debug flag.
packet The state of the designated debug flag.
all
(Optional) Set all packet debug flags.
receiving
(Optional) Set packet receiving debug flag.
sending
(Optional) Set packet sending debug flag.
retransmission
The state of the OSPF retransmission debug flag.
spf The state of the designated debug flag.
all
(Optional) Set all SPF debug flags.
intra (Optional) Set intra-area SPF debug flag.
inter (Optional) Set inter-area SPF debug flag.
extern
(Optional) Set AS external SPF debug flag.
timer The state of the OSPF timer debug flag.
virtual_link
The state of the OSPF virtual link debug flag.
route The state of OSPF route debug flag.