Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 773 / 1058

67. Precision Time Protocol (PTP) Commands
774
67.9. config ptp p2p_transparent ports
 Description
This command is used to configure the pdelay_request message attribute for the
message interval of the P2P transparent clock.
 Format
config ptp p2p_transparent ports [<portlist> | all] pdelay_req_interval <sec 1-32>

Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the pdelay_req_interval attribute of all the PTP ports to 4 seconds:
ports Specifies the list of port used for this configuration.
<portlist>Enter the list of port used for this configuration here.
all
Specifies that all the ports will be used for this configuration.
pdelay_req_intervalSpecifies the permitted mean time interval between successive messages.
<sec 1-32>
Enter the permitted mean time interval value used here. This value must be
between 1 and 32.
Zxxx0:admin# config ptp p2p_transparent ports all pdelay_req_interval 4
Command: config ptp p2p_transparent ports all pdelay_req_interval 4
Success.
Zxxx0:admin#