Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 936 / 1058

84. Utility Commands
937

Example
To upload the attack log from the device to an RCP server:
84.6. upload cfg_toRCP
 Description
This command is used to upload a configuration file from the device to a Remote
Copy Protocol (RCP) server.
 Format
upload cfg_toRCP [{username <username>} {<ipaddr>} dest_file <path_filename 64> |
rcp: <string 128>] {unit <unit_id 1-4>} {src_file <pathname>} {[include | exclude |
begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude |
begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude |
begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}}}}}
 Parameters
Zxxx0:admin# upload attack_log_toRCP username rcp_user 172.18.212.104 dest_file /
home/Zxxx0.log unit 2
Command: upload attack_log_toRCP username rcp_user 172.18.212.104 dest_file /home/
Zxxx0.log unit 2
Connecting to server.......... Done.
Upload Attack log............. Done.
Success.
Zxxx0:admin#
username(Optional) Specify the remote user name on the RCP server.
<username>
Specify the remote user name on the RCP server.
<ipaddr>(Optional) Specify the IP address of the RCP server.
dest_file Specify the path name on the RCP server. Note: If a user specifies the relative file path,
the path search strategy will depend on the server system. For some systems, the current
user working directory will be searched first, followed by the environment paths.
<path_filename 64>
Specify the path name on the RCP server or local RCP client.
rcp: Specify the path on the RCP server or local RCP client. Note: If a user specifies the relative
file path, the path search strategy will depend on the server system. For some systems,
the current user working directory will be searched first, followed by the environment
paths.
<string 128>
Specify the path on the RCP server or local RCP client.