Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 360 / 1058

30. FDB Commands
361

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To create an unicast MAC forwarding:
30.3. create multicast_fdb

Description
This command is used to make an entry into the Switching Hub's multicast MAC
address forwarding database.

Format
create multicast_fdb <vlan_name 32> <macaddr>
 Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
<vidlist> Enter the VLAN ID used here.
<macaddr>
Specify the MAC address to be added to the static forwarding table.
port The Switching Hub will always forward traffic to the specified device through this port.
<port>Specify the port number corresponding to the MAC destination address.f
drop Specify to have the Switching Hub drop traffic.
Zxxx0:admin#create fdb vlanid 1 00-11-22-33-44-55 port 1:5
Command: create fdb vlanid 1 00-11-22-33-44-55 port 1:5
Success.
Zxxx0:admin#
<vlan_name 32>
Specify the name of the VLAN on which the MAC address resides. The maximum length is
32 characters.
<macaddr>
Specify the multicast MAC address to be added to the static forwarding table.