67. Precision Time Protocol (PTP) Commands
773
If the sync_interval is 0.5 seconds, then the delay_req_interval attribute of the all PTP
ports is configured as 0.
To configure the pdelay_req_interval attribute of the all PTP ports as 5 seconds:
To configure the delay_mechanism attribute of the all the PTP ports as P2P:
Zxxx0:admin# config ptp boundary ports all sync_interval 2
Command: config ptp boundary ports all sync_interval 2
Success.
Zxxx0:admin#
Zxxx0:admin# config ptp boundary ports all delay_req_interval 0
Command: config ptp boundary ports all delay_req_interval 0
Success.
Zxxx0:admin#
Zxxx0:admin# config ptp boundary ports all pdelay_req_interval 5
Command: config ptp boundary ports all pdelay_req_interval 5
The pdelay_req interval is automatically adjusted to 8.
Success.
Zxxx0:admin#
Zxxx0:admin# config ptp boundary ports all delay_mechanism p2p
Command: config ptp boundary ports all delay_mechanism p2p
Success.
Zxxx0:admin#
Summary of Contents for ZEQUO 6400
