Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 685 / 1058

60. OSPFv3 Commands
686
60.14. show ospfv3 neighbor

Description
This command is used to display OSPFv3 neighbor information.
 Format
show ospfv3 neighbor {<neighbor_id> ipif <ipif_name 12>}

Parameters
Zxxx0:admin# show ospfv3 lsdb
Command: show ospfv3 lsdb
Router LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# Link
0.0.0.0 2.2.2.2 696 0x80000003 0
Link LSA (Interface System)
Link State ID ADV Router Age Seq# Prefix
0.0.0.1 2.2.2.2 696 0x80000003 1
Intra-Area-Prefix LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# Ref LSA Type
0.0.0.1 2.2.2.2 684 0x80000004 0x2001
Total Entries: 3
Zxxx0:admin# show ospfv3 lsdb type rtrlink
Command: show ospfv3 lsdb type rtrlink
LS Age: 782
LS Type: Router-LSA
Link State ID: 0.0.0.0
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000003
Checksum: 0xED3A
Length: 24
Flags: 0x0: - - - -
Options: 0x13: - R - - E V6
Total Entries: 1
Zxxx0:admin#
<neighbor_id>
(Optional) Specifies the ID of the neighbor.
ipif (Optional) Specifies the IP interface where the neighbor is built.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters
long.