Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 950 / 1058

84. Utility Commands
951
84.19. traceroute6

Description
This command is used to trace the IPv6 routed path between the Switch and a
destination end station.

Format
traceroute6 <ipv6addr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-
65535> | probe <value 1-9>}

Parameters
Zxxx0:admin#traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121 probe 3
<10 ms 10.12.73.254
<10 ms 10.12.73.254
<10 ms 10.12.73.254
<10 ms 10.19.68.1
<10 ms 10.19.68.1
<10 ms 10.19.68.1
<10 ms 10.48.74.121
Trace complete.
Zxxx0:admin#
<ipv6addr>
Specify the IPv6 address of the destination end station.
ttl (Optional) Specify the time to live value of the trace route request.
<value 1-60>
Specify the time to live value of the trace route request. This is the maximum
number of routers that a trace route packet can pass while seeking the network
path between two devices. The range for the TTL is 1 to 60 hops. The default value
is 30.
port (Optional) Specify the port number.
<value 30000-649000>
Specify the port number. The value range is from 30000 to 64900. The default is
33435.
timeout (Optional) Specify the timeout period while waiting for a response from the remote
device.
<sec 1-65535>
Specify the timeout period while waiting for a response from the remote device. A
value of 1 to 65535 seconds can be specified. The default is 5 seconds.
probe (Optional) Specify the number of probes.
<value 1-9>
Specify the number of probes. The range is from 1 to 9. If unspecified, the default
value is 1.