Panasonic ZEQUO 6400, Operating Instructions Manual

Page: 441 / 1058

38. IP Routing Commands
442
38.6. show ipv6route
 Description
This command is used to display the Switching Hub's current IPv6 routing table.

Format
show ipv6route {[<ipv6networkaddr> | <ipv6addr>]} {[static | ospfv3 | hardware]}

Parameters

Restrictions
None.

Example
To display an IPv6 route:
<ipv6networkaddr>
Enter the IPv6 destination network address of the route.
<ipv6addr>
Enter the IPv6 address.
static Display the static route entries.
ospfv3 Display the OSPFv3 route entries.
hardware
Display the route entries which have been written into hardware table.
Zxxx0:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0 Protocol: Static Metric: 1
Next Hop : FEC0::5 IPIF : System
Total Entries: 1
Zxxx0:admin#