7. Access Control List (ACL) Commands
101
packet_content
Specify the packet content for the user defined mask.
offset_chunk_1
Specifies the contents of the offset trunk 1 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 1 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
Enter the additional mask value used here.
offset_chunk_2
Specifies the contents of the offset trunk 2 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 2 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
Enter the additional mask value used here.
offset_chunk_3
Specifies the contents of the offset trunk 3 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 3 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
Enter the additional mask value used here.
offset_chunk_4
Specifies the contents of the offset trunk 4 to be monitored.
<hex 0x0-0xffffffff>
Enter the contents of the offset trunk 4 to be monitored here.
mask Specifies an additional mask for each field.
<hex 0x0-0xffffffff>
Enter the additional mask value used here.
ipv6
Specify that the rule applies to IPv6 fields.
class Specify the value of the IPv6 class.
<value 0-255>
Specify the value between 0 and 255.
flowlabel
Specify the value of the IPv6 flow label.
<hex 0x0-0xfffff>
Specify the value of the IPv6 flow label.
source_ipv6
Specify the value of the IPv6 source address.
<ipv6addr>
Specify the value of the IPv6 source address.
mask (Optional) Specify the mask.
<ipv6mask>
Specify the mask.
destination_ipv6
Specify the value of the IPv6 destination address.
<ipv6addr>
Specify the value of the IPv6 destination address.
mask (Optional) Specify the mask.
<ipv6mask>
Specify the mask.
Summary of Contents for ZEQUO 6400
