- OR -
- OR -
Console
NVR
Router / switch
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 6 UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.
AW-FGT-100C-120 PoE Switch
Quick Installation Guide
The AW-FGT-100C is a 8xFE PoE + 1xGE UTP + 1xGE SFP unmanaged PoE switch capable of feeding 15.4/30W (54V
max. per port) power to Power over Ethernet (PoE) devices. The switch is capable of a total of 115 Watts power budget.
IMPORTANT
:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch
* 1x Quick Installation Guide
* 2x rack mount ears
* 1x power cord (type by the shipped-to area)
PACKAGE CONTENTS
Rack-mounting
Connections
Use SFP, LC type transceiver with 100Mbps or 1Gbps transfer speed in Single mode (10km,30km,50km,80km) or Multi
mode (0.5m or 2km) or Bidi (10km,30km,50km,80km).
PWR
Green ON
Power is on and normal.
Green OFF
Power is off.
LINK/ACT
Green ON
Ethernet port is connected.
Blinking
Data is being transmitted or received.
Green OFF
No connection.
GE
Green ON
Link speed at 1000Mbps
Green OFF
Link speed at 10/100Mbps
PoE
Orange ON
Port is linked to a powered device.
Blinking
Abnormal power supply is detected
Orange OFF
No device is connected.