Hitachi CHROMASTER 5160, Инструкция по эксплуатации

Страница: 88 / 1022

3 - 51
PROG No.=1
PRESSURE MAIN MAX MIN (MPa)
20.0 0
(a)
TIME FLOW EVENT
0.0 1.000
10.0 1.000 11 21 31 41
10.1 1.000
20.0 1.000
(b) 25.0 10 20 30 40
30.0 2.000
30.1 1.000
40.0 1.000 00 92
Fig. 3-4 Example of Program
(a) For EVENT, up to 4 event codes are settable at each
time point. It is possible to generate contact outputs
at each EVENT terminal at the same time. You can
also obtain an internal action, such as a pump stop
and the ringing of a buzzer.
Example)
EVENT= 1 - 1 - ENT - 2 - 1 - ENT
(b) In case that an event setting is desired independent of
FLOW, only the event code showed be entered.
Press ENT to skip all the entries you do not want until
you reach event column.
In the SET PROGRAM mode, the interpolation of mixing ratio,
flow rate, etc. that occurs in a time program is as follows.
Parameter Flow Rate
Interpolation Linear
T
N
T
N+1
T
N
, T
N+1
: Preset time
Fig. 3-5 Interpolation of Mixing ratio and Flow rate
NOTE : For generating a stepwise gradient program, utilize
T
N+1
- T
N
= 0.1.