Hitachi CHROMASTER 5160, Инструкция по эксплуатации

Страница: 802 / 1022

No. Display Function
1 WASH Delivers wash fluid with the wash pump to
rinse out flow paths.
2 PAUSE Puts an analysis sequence to pause.
Releases pause when pressed again.
UTLTY Sets the basic operating conditions. 3
SET UP Keep pressing the wash button and the main
switch at the same time until a setup screen
is displayed. Conditions of thermostat and
the LCD contrast are selected.
4 GLP Used for confidence-level reporting.
Sets the key lock.
PROG Sets conditions for a sequential program. 5
INSERT Inserts a step in sequential programming.
6 △ Scroll up and down display.
7
▽
Scroll up and down display.
8 START Starts a sequential program.
9 STOP Stops a sequential program.
10 THERMO Sets the thermostat (option).
ESC Press this key when the basic analysis
condition has been set, when the analysis
condition setting is to be interrupted.
And also press this key for unlocking the
key lock.
11
LOCK OFF Use this key for unlocking the keys.
12 FUNC Moves the mechanism for maintenance,
etc.
13 SELECT Used for selecting a setting item when
setting the rack parameter in the robotic
mode.
14 DEL Used for deleting a step in a sequential
program.
15 IDLE Returns the autosampler to the idle
position.
Used after a midway stop of a sequential
program, execution of ALL END or
erasure of an error message by CL in the
event of an error.
16 CL Used for erasure of data under input.
Also usable for erasure of an error
message at occurrence of an error.
(the CL key is effective while locking the
keyboard.)
17 ENT Inputs a numeral.
NOTE
: Press the ESC key to return to the previous state when an
erroneous operation is made.
NOTE
: Editing of a sequential program, addition of an urgent
sample, and an exchange of sample rack can be
performed while it's in the state of PAUSE.
2 - 6