Freescale Semiconductor MPC5565, Reference Manual

Page: 368 / 1153

Enhanced Direct Memory Access (eDMA)
MPC5565 Microcontroller Reference Manual, Rev. 1.0
Freescale Semiconductor 9-43
5. The source to destination transfers execute as follows:
a) read_byte (0x1000), read_byte (0x1001), read_byte (0x1002), read_byte (0x1003)
b) write_word (0x2000) -> first iteration of the minor loop
c) read_byte (0x1004), read_byte (0x1005), read_byte (0x1006), read_byte (0x1007)
d) write_word (0x2004) -> second iteration of the minor loop
e) read_byte (0x1008), read_byte (0x1009), read_byte (0x100a), read_byte (0x100b)
f) write_word (0x2008) -> third iteration of the minor loop
g) read_byte (0x100c), read_byte (0x100d), read_byte (0x100e), read_byte (0x100f)
h) write_word (0x200c) -> last iteration of the minor loop
6. eDMA engine writes: TCD.SADDR = 0x1010, TCD.DADDR = 0x2010, TCD.CITER = 1.
7. eDMA engine writes: TCD.ACTIVE = 0.
8. The channel retires -> one iteration of the major loop.
The eDMA goes idle or services the next channel.
9. Second hardware (eDMA peripheral request) requests channel service.
10. The channel is selected by arbitration for servicing.
11. eDMA engine writes: TCD.DONE = 0, TCD.START = 0, TCD.ACTIVE = 1.
12. eDMA engine reads: channel TCD data from local memory to internal register file.
13. The source to destination transfers execute as follows:
a) read_byte (0x1010), read_byte (0x1011), read_byte (0x1012), read_byte (0x1013)
b) write_word (0x2010) -> first iteration of the minor loop
c) read_byte (0x1014), read_byte (0x1015), read_byte (0x1016), read_byte (0x1017)
d) write_word (0x2014) -> second iteration of the minor loop
e) read_byte (0x1018), read_byte (0x1019), read_byte (0x101a), read_byte (0x101b)
f) write_word (0x2018) -> third iteration of the minor loop
g) read_byte (0x101c), read_byte (0x101d), read_byte (0x101e), read_byte (0x101f)
h) write_word (0x201c) -> last iteration of the minor loop -> major loop complete
14. eDMA engine writes: TCD.SADDR = 0x1000, TCD.DADDR = 0x2000,
TCD.CITER = 2 (TCD.BITER).
15. eDMA engine writes: TCD.ACTIVE = 0, TCD.DONE = 1, EDMA_IRQR n = 1.
16. The channel retires -> major loop complete.
The eDMA goes idle or services the next channel.