Freescale Semiconductor MPC5565, Reference Manual

Page: 244 / 1153

System Integration Unit (SIU)
MPC5565 Microcontroller Reference Manual, Rev. 1.0
Freescale Semiconductor 6-69
Refer to Table 6-19 for bit field definitions. Table 6-78 lists the PA fields for
ETPUA[16:19]_PCSD[1:4]_GPIO[130:133].
6.3.1.85 Pad Configuration Register 134 (SIU_PCR134)
The SIU_PCR134 register controls the function, direction, and electrical attributes of
ETPUA[20]_IRQ[8]_GPIO[134]. Both the input and output channels of ETPUA[20] are connected to
pins.
Figure 6-84. ETPUA[20]_IRQ[8]_GPIO[134] Pad Configuration Register (SIU_PCR134)
Refer to Table 6-19 for bit field definitions. Table 6-79 lists the PA fields for
ETPUA[20]_IRQ[8]_GPIO[134].
Table 6-78. PCR130–133 PA Field Definition
PA Field Pin Function
0b00 GPIO[130:133]
0b01 ETPUA[16:19]
0b10 PCSD[1:4]
0b11 ETPUA[16:19]
Address: Base + 0x014C Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0
PA OBE
1
1
When configured as IRQ[8], the OBE bit has no effect. The OBE bit must be set to 1 for ETPUA[20] or GPIO[134]
when configured as output.
IBE
2
2
When the pad is configured as an output, set the IBE bit to 1 to show the pin state in the GPDI register. Clear the IBE bit to 0
to reduce power consumption. The IBE bit must be set to 1 for ETPUA[20] or GPIO[134] when configured as input.
0 0
ODE HYS SRC WPE WPS
W
RESET: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 U
3
3
The weak pullup/down selection at reset for the ETPUA[20] pin is determined by the WKPCFG pin.
Table 6-79. PCR134 PA Field Definition
PA Field Pin Function
0b00 GPIO[134]
0b01 ETPUA[20]
0b10 IRQ[8]
0b11 ETPUA[20]