• All previous
no passive-interface
interface
commands are removed
from the running configuration.
no passive-interface
interface
• Remove the interface from the passive list.
• The ABR status for the router is updated.
• If
passive-interface default
is specified, then save
no passive-
interface
interface
into the running configuration.
No passive-interface default
• Clear everything and revert to the default behavior.
• All previously marked passive interfaces are removed.
• May update ABR status.
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
Z9500
Syntax
redistribute {connected | rip | static} [metric
metric-value
|
metric-type
type-value
] [route-map
map-name
] [tag
tag-value
]
To disable redistribution, use the
no redistribute {connected | isis |
rip | static}
command.
Parameters
connected
Enter the keyword
connected
to specify that information
from active routes on interfaces is redistributed.
rip
Enter the keyword
rip
to specify that RIP routing
information is redistributed.
static
Enter the keyword
static
to specify that information from
static routes is redistributed.
metric
metric-
value
(OPTIONAL) Enter the keyword
metric
then a number. The
range is from 0 (zero) to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords
metric-type
then one of
the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of the route map.
tag
tag-value
(OPTIONAL) Enter the keyword
tag
then a number. The
range is from 0 to 4294967295.
1290
Open Shortest Path First (OSPFv2 and OSPFv3)
