Usage
Information
Set the time interval to a number large enough to prevent unnecessary
retransmissions. For example, the interval must be larger for interfaces connected
to virtual links.
ip ospf transmit-delay
To send a link state update packet on the interface, set the estimated time elapsed.
Z9500
Syntax
ip ospf transmit-delay
seconds
To return to the default value, use the
no ip ospf transmit-delay
command.
Parameters
seconds
Enter the number of seconds as the interval between
retransmission. The range is from 1 to 3600. The default is
1
second
.
This value must be greater than the transmission and
propagation delays for the interface.
Defaults
1 second
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.1
Introduced on the E-Series.
1284
Open Shortest Path First (OSPFv2 and OSPFv3)
