Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced
Usage
Information
The output of the
show interfaces
command displays the configured rate
interval, along with the collected traffic data.
Related
Commands
show interfaces
— displays information on physical and virtual interfaces.
reset linecard
Reset the ports on a Z9500 line card.
Z9500
Syntax
reset linecard
slot-id
Parameters
linecard
slot-id
Enter the slot ID number to specify the set of line-card ports
to be reset. The range of Z9500 line-card slot IDs is 0 to 2.
Defaults
none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell NetworkingOS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.7.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
8.3.1.0
Added the
hard reset
option.
7.8.1.0
Augmented to run on the standby unit in order to reset the
standby unit directly.
Interfaces
863