Usage
Information
This command specifies the maximum number of attempts to authenticate a user
on an SSH connection with the remote host for password authentication. SSH
disconnects when the number of password failures exceeds authentication-retries.
ip ssh connection-rate-limit
Configure the maximum number of incoming SSH connections per minute.
Z9500
Syntax
ip ssh connection-rate-limit
1-10
Parameters
1-10
Enter the number of maximum numbers of incoming SSH
connections allowed per minute. The range is from 1 to 10
per minute. The default is
10 per minute
.
Defaults
10 per minute
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Z9500
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the
no ip ssh
hostbased-authentication enable
command.
Security
1657
