Dell Networking Z9500, Command Reference Manual

Page: 784 / 1905

Defaults Disabled
Command
Modes CONFIGURATION (conf-frrp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
interface
Configure the primary, secondary, and control-vlan interfaces.
Z9500
Syntax
interface {primary interface secondary interface control-vlan
vlan-id }
To return to the default, use the
no interface {primary interface
secondary interface control-vlan vlan-id}
command.
Parameters
primary
interface
Enter the keyword
primary
to configure the primary
interface then one of the following interfaces and slot/port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a port channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 512.
784
Force10 Resilient Ring Protocol (FRRP)