Dell Networking Z9500, Command Reference Manual

Page: 1470 / 1905

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced.
Related
Commands
vlan bridge-priority — sets the bridge-priority value.
vlan hello-time — changes the time interval between BPDUs.
vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ configuration.
vlan hello-time
Set the time interval between generation of PVST+ 7 BPDUs.
Z9500
Syntax
vlan vlan-range hello-time seconds
To return to the default value, use the
no vlan hello-time
command.
Parameters
vlan vlan-range Enter the keyword
vlan
then the VLAN numbers. The range
is from 1 to 4094.
hello-time
seconds
Enter the keywords
hello-time
then the time interval, in
seconds, between transmission of BPDUs. The range is from
1 to 10 seconds. The default is
2 seconds .
Defaults 2 seconds
Command
Modes CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
1470
Per-VLAN Spanning Tree Plus (PVST+)