show ip flow
Show how a Layer 3 packet is forwarded when it arrives at a particular interface.
Z9500
Syntax
show ip flow interface
interface
{source-ip
address
destination-ip
address
} {protocol
number
[tcp | udp]} {src-port
number
destination-port
number
}
Parameters
interface
interface
Enter the keyword
interface
then one of the following
interface keywords.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
source-ip
address
Enter the keywords
source-ip
then the IP source address
in IP address format.
destination-ip
address
Enter the keywords
destination-ip
then the IP
destination address in IP address format.
protocol
number
[tcp |
udp]
Enter the keyword
protocol
then one of the protocol type
keywords:
tcp
,
udp
, or
protocol
number
The protocol
number range is from 0 to 255. .
src-port
number
Enter the keywords
src-port
then the source port number.
destination-
port
number
Enter the keywords
destination-port
then the destination
port number.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.10.0
Introduced on the S4810.
8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
972
IPv4 Routing
