Version
Description
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
To remove all configured debug commands for BGP, enter the
no debug ip bgp
command.
debug ip bgp soft-reconfiguration
Enable soft-reconfiguration debug.
Z9500
Syntax
debug ip bgp [vrf
vrf-name
] [
A.B.C.D
|
X:X:X:X::X
|
peer-group-
name
] soft-reconfiguration
To disable, use the
debug ip bgp [
A.B.C.D
|
X:X:X:X::X
|
peer-group-
name
] soft-reconfiguration
command.
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to enable soft-reconfiguration debugging on that
VRF.
A.B.C.D
(OPTIONAL) Enter the IPv4 address of the neighbor in dotted
decimal format.
X:X:X:X::X
(OPTIONAL) Enter an IPv6 address.
peer-group-
name
(OPTIONAL) Enter the name of the peer group to disable or
enable all routers within the peer group..
Defaults
Disabled
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added support for VRF.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
400
Border Gateway Protocol
