• Queues 8 to 15 process packets destined to the Route
Processor CPU.
• Queues 16 to 23 process packets destined to the line
card CPU.
Defaults
Clear per-queue rate-limiting counters for all control-plane and port traffic.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.8.0
Introduced on the S4810.
Usage
Information
To display the per-queue counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the
show control-
traffic queue
command.
Example
Dell#clear control-traffic queue 2 counters
Dell#
control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
Z9500
Syntax
control-plane-cpuqos
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Control Plane Policing (CoPP)
591
