enable password
Change the password for the
enable
command.
Z9500
Syntax
enable password [level
level
] [
encryption-type
]
password
To delete a password, use the
no enable password [
encryption-type
]
password
[level
level
]
command.
Parameters
level
level
(OPTIONAL) Enter the keyword
level
then a number as the
level of access. The range is from 1 to 15.
encryption-
type
(OPTIONAL) Enter the number
7
or
0
as the encryption type.
Enter a
7
then a text string as the hidden password. The text
string must be a password that was already encrypted by a
Dell Networking router.
Use this parameter only with a password that you copied
from the
show running-config
file of another Dell
Networking router.
password
Enter a text string, up to 32 characters long, as the clear text
password.
Defaults
No password is configured.
level
=
15
.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Neworking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Security
1615
