Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
Timer values configured with the
neighbor timers
command override the timer
values configured with any other command.
When two neighbors, configured with different
keepalive
and
holdtime
values,
negotiate for new values, the resulting values are as follows:
• the lower of the
holdtime
value is the new
holdtime
value, and
• whichever is the lower value; one-third of the new
holdtime
value, or the
configured
keepalive
value, is the new keepalive value.
neighbor update-source
Enable the system to use Loopback interfaces for TCP connections for BGP sessions.
Z9500
Syntax
neighbor {
ip-address
|
peer-group-name
} update-source
interface
To use the closest interface, use the
no neighbor {
ip-address
|
peer-
group-name
} update-source
interface
command.
Parameters
ip-address
Enter the IP address of the peer router in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to disable all routers within
the peer group.
interface
Enter the keyword
loopback
then a number of the
Loopback interface. The range is from 0 to 16383.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
436
Border Gateway Protocol
