cam-acl-egress
Allocate CAM for egress ACLs.
Z9500
Syntax
cam-acl-egress
default
| l2acl
number
ipv4acl
number
ipv6acl
number
}
Parameters
default
Reset egress CAM ACL entries to default settings.
l2acl
number
ipv4acl
number
ipv6acl
number
Allocate space to each CAM region.
Enter the CAM profile name then the amount of CAM space
to be allotted. The total space allocated must equal 13. The
range for ipv4acl is from 1 to 4. The ipv6acl range must be a
factor of 2.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
cam-optimization
Optimize CAM utilization for QoS Entries by minimizing require policy-map CAM space.
Z9500
Syntax
cam-optimization [qos]
Parameters
qos
Optimize CAM usage for QoS.
Defaults
Disabled.
582
Content Addressable Memory (CAM)
